WARP DRIVE IS THE ONLY TRULY SOLID CARBON FIBER COMPOSITE PROPELLER ON THE MARKET

All of our blade modifications are a secondary process to the fabrication of the blades, allowing us to offer our customers the following unique benefits.

CUSTOM DIAMETERS

Our blades can be trimmed to any diameter between 42-in and 72-in for Standard, HP and HPL hubs, 42-in and 74-in for HX hubs, and 42-in to 82-in for OS hubs. Blade length cannot be added back once trimmed.

BLADE TRIMMING
$85/BLADE

If you would like to use your blades on a new application or are not achieving your performance goals, you can send the blades back in to be trimmed to a shorter diameter.

Not sure if you have the best diameter for your application?

UPGRADE AT ANY TIME

We offer a variety of blade modifications including an inlaid nickel leading-edge, tapered tips, and painted tips. All of these are secondary processes that can be done at any time over the life of the propeller.

NICKEL-LEADING EDGE
$130/BLADE

A nickel alloy is inlaid into the leading-edge of the blade for increased protection. This extends the life of the blade and is highly recommend for harsh conditions such as rain, grass and/or sand.

TAPERED TIPS
$70/BLADE

Tapering removes blade area which reduces blade weight and allows for a higher blade pitch-setting which increases cruise performance.

PAINTED TIPS
$80/BLADE

Blades can be ordered with red or white tips as seen in the photo above.

Would you like to upgrade to your blades?

REPAIRABLE

Warp Drive’s proprietary manufacturing process results in a product with unmatched strength and durability. Damage occurring from normal use can typically be repaired. The inlaid nickel leading-edge can be replaced, which reduces the cost of ownership.

Depending on the degree of damage, you will be quoted ONE of the following prices per blade.

REPAIR DAMAGE
$180/BLADE

The blade damage is repaired and the blade is repainted and balanced.

NICKEL REPLACEMENT
$250/BLADE

The nickel is removed, the blade damage is repaired, the nickel is replaced and the blade is repainted and balanced.

Would you like to begin the repair process?

If a blade is beyond modification or repair, individual replacement blades may be purchased.

INDIVIDUALLY REPLACEABLE

Our precision-balancing process allows us to build replacement blades for existing propellers instead of requiring a whole new propeller to be purchased when damage occurs.

Note: we cannot build replacement blades for propellers made before 2006.

H BLADES
$310/BLADE

All new propellers come with our H-model blades and replacement blades are available.

C BLADES
$310/BLADE

Though discontinued, we will continue to provide our “legacy” C-model blades to existing customers in need of a replacement.

Would you like to order a replacement blade?